教育及工作经历

2025.06至今，厦门大学萨本栋微米纳米科学技术研究院教授

2023.09-2025.05美国德州大学大峡谷分校，长聘轨助理教授

2022.10-2023.08美国德州大学大峡谷分校，访问助理教授

2019.04-2022.09德国汉诺威大学动力学与振动研究所，博士后

2019.04毕业于德国汉诺威大学机械工程学院，获工学博士学位，师从德国工程院院士Jörg Wallaschek教授

教学工作

在德国汉诺威大学主讲研究生课程《超声波的物理学原理及其应用》

在美国德州大学大峡谷分校主讲本科生课程《工程经济学》和研究生课程《超声波在制造业中的应用》

研究方向

超声引线键合、超声辅助加工、超声烧结、超声清洗、增材制造、特种能场复合加工

荣誉奖励

·国家高层次青年人才

·2018年度国家优秀自费留学生奖学金

·德国汉诺威大学校友会Award for an Outstanding Performance and Collaboration of a Visiting Researcher

·德国下萨克森州科学与文化部MARIO奖学金

招生方向

每年招收博士研究生、硕士研究生若干，常年招收博士后，欢迎具有机械、物理、材料、自动化、仪器等专业背景，对特种能场复合加工、半导体封装、压电与超声技术、增材制造、智能装备等方向感兴趣的同学加入。详情欢迎邮件咨询。

部分期刊代表文章

1.Long, Y., Arndt, M., Sun, C., Dencker, F., Wurz, M. and Twiefel, J., 2023. Detection of joining mechanisms at different locations of the wire/substrate interface during ultrasonic wire bonding via a PZT-based sensor array. Journal of Materials Processing Technology, 312, p.117826.

2.Long, Y., Arndt, M., Dencker, F., Wurz, M.C. Twiefel, J. and Wallaschek, J., 2022. Impact of surface texture on ultrasonic wire bonding process. Journal of Materials Research and Technology, 20, pp. 1828-1838.

3.Grajczak, J., Nowroth, C., Long, Y., Twiefel, J., Wallaschek, J., Nothdurft, S., Hermsdorf, J. and Kaierle, S., 2022. Investigations on the effect of post treatment utilizing ultrasonic standing waves on the hardness of laser beam welds in stainless steel. Procedia CIRP, 111, pp.405-408.

4.Long, Y., He, B., Cui, W., Ji, Y., Zhuang, X. and Twiefel, J., 2020. Investigations on the mechanism of microweld changes during ultrasonic wire bonding by molecular dynamics simulation. Materials & Design, 192, p.108718.

5.You, C., Zhao, G., Chu, X., Zhou, W., Long, Y. and Lian, Y., 2020. Design, preparation and cutting performance of bionic cutting tools based on head microstructures of dung beetle. Journal of Manufacturing Processes, 58, pp.129-135.

6.Long, Y., Schneider, F., Li, C., Hermsdorf, J., Twiefel, J. and Wallaschek, J., 2019. Quantification of the Energy Flows During Ultrasonic Wire Bonding Under Different Process Parameters. International Journal of Precision Engineering and Manufacturing-Green Technology, 6(3), pp. 449-463.

7.Long, Y., Bai, F., Zhang, Y., Saalbach, K.A. and Twiefel, J., 2019. Impacts of Ultrasound on Oxide Removal-an Attempt towards Acid-Free Cleaning. Ultrasonics Sonochemistry, 57, pp. 1-11.

8.Long, Y., Dencker, F., Isaak, A., Hermsdorf, J., Wurz, M. and Twiefel, J., 2018. Self-cleaning mechanisms in ultrasonic bonding of Al wire. Journal of Materials Processing Technology, 258, pp. 58-66.

9.Long, Y., Twiefel, J. and Wallaschek, J., 2017. A review on the mechanisms of ultrasonic wedge-wedge bonding. Journal of Materials Processing Technology, 245, pp. 241-258.

10.Long, Y., Li, J., Timmer, D.H., Jones, R.E. and Gonzalez, M.A., 2014. Modeling and optimization of the molten salt cleaning process. Journal of cleaner production, 68, pp. 243- 251.

科研项目（部分）

德国科研基金，《Fundamental Investigation into the Mechanisms of Ultrasonic Assisted Single-Component and Multi-Component Low Temperature Sintering for the Assembly of Power Electronic Components》, 2021至今,在研。

美国国家自然科学基金，《Acquisition of a Photo-Induced Force Microscope for Simultaneous Nanoscopic and Spectroscopic Imaging of Multifunctional Materials and Interfaces》, 2024至今，在研。

美国德州大学大峡谷分校种子项目, 《Ultrasonic Vibration – a novel method to replace failed prosthetic implants》, 2023-2024, 结题。

德国科研基金，《Fundamental Investigation into the Mechanism of Ultrasonic Wedge-Wedge Bonding through Change of Topography》，2017-2020，结题。

学术兼职

Ultrasonics Sonochemistry, Scripta Materialia, Materials Science & Engineering: A, Journal of Manufacturing Processes, Journal of Cleaner Production, International Journal of Precision Engineering and Manufacturing-Green Technology, MRS Communications, Results in Physics, Measurement, Case Studies in Thermal Engineering, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Microelectronics International等国际期刊审稿人